Hi all,
I'm having issues getting the eds file to register properly in rs networx for devicenet. Its my first go at devicenet programming. I have a controllogix L61 processor running firmware revision 16 with a 1756-DNB comm card fw rev 10. The devicenet network only has the comm card (node 63) and a B&R communication rack (node 1). This is part of an old filling system that i've been asked to integrate with a newer filling system.
I can see both nodes in linx (v 3.51), the B&R is unrecognized which is to be expected. I see the 1756-DNB in linx and it allows me to upload the eds file. In rs networx i take said eds file and "register" the module. All goes well, no issues with that process. After the wizard is complete the 1756-DNB remains unrecognized by my computer.
Does anyone see any reason for this? I've tried shutting down networx and restarting it, no help there.
Thanks for any help
Ted
I'm having issues getting the eds file to register properly in rs networx for devicenet. Its my first go at devicenet programming. I have a controllogix L61 processor running firmware revision 16 with a 1756-DNB comm card fw rev 10. The devicenet network only has the comm card (node 63) and a B&R communication rack (node 1). This is part of an old filling system that i've been asked to integrate with a newer filling system.
I can see both nodes in linx (v 3.51), the B&R is unrecognized which is to be expected. I see the 1756-DNB in linx and it allows me to upload the eds file. In rs networx i take said eds file and "register" the module. All goes well, no issues with that process. After the wizard is complete the 1756-DNB remains unrecognized by my computer.
Does anyone see any reason for this? I've tried shutting down networx and restarting it, no help there.
Thanks for any help
Ted