DH485 coms

nathan.slade

Member
N
Join Date
Mar 2010
Location
n.s.w
Posts
69
Hi
I have a small dh485 network setup on my bench with 3 plc's. 1) ML1200 NODE 2, 2) SLC405 NODE 3, 3)SLC505 NODE 4 all connected to 2 AIC+. Using the pic driver I can see all plc's on the network but when I try using the slc505 dh485 passthru I can only see the ML1200. What have I forgotten to do in the slc505 to be able to see the SLC405 through dh485 passthru? Thanks all for the help
 

Similar Topics

B
DH485 Coms with 1761-NET-AIC
I have a existing Panelview Plus 1000 that is communicating to a SLC 5/03 just fine. I want to communicate with at SLC 5/04 using the...
Replies
1
Views
2,795
NorthControl
N
T
5/02 coms to new uic to dh485
Having a problem with communicating to older 5/02 1747 L524 plcs with the UIC interface. XP update happened to the laptop and the PIC was no...
Replies
3
Views
2,713
Magic 8 Ball
Magic 8 Ball
S
DH485 conenction
Hello all, i have seen a few things here and there about connecting to a panelview 550, however i still would like to ask a few things, I have...
Replies
6
Views
144
stallone
S
D
Micrologix 1100 and Panelview 800 DH485 communication
Hi all, I had a setup with 2 Micrologix 1100 connected to a Panelview C300 over DH-485. I was mandated to upgrade the HMI, and proposed to...
Replies
5
Views
907
DRB
D
K
Adding Duplicate Standard PanelView (not Plus) to SLC 5/04 PLC over DH485
Hello, We have an older machine that has a standard PanelView (2711-T10C3) connected over DH485 to a SLC 5/04 PLC via a 1761-NET-AIC module in...
Replies
1
Views
686
Ken Roach
Ken Roach
Back
Top Bottom