DVT 515 Camera Problem

dYoast

Lifetime Supporting Member
D
Join Date
Mar 2008
Location
Kansas City
Posts
252
I have a DVT 515 camera that keeps locking on the busy signal. It will start an inspection, but never stop. The only I/O that is then on is the busy signal. I have to remove power and restart in order to begin operating again. This same problem has occured previously with another camera. I have tried the camera on a different power cable, different Ethernet cable and different breakout board, but the problem follows the camera.
I am using Intellect version 1.40.
Has anyone experienced this problem? Any ideas?

Thanks in advance.
 

Similar Topics

L
help with msg between controllogix and dvt framwork camera
hi, i try to connect dvt framework 2.8 to controllogix 1756-L62 using a ENBT module. im able to connect to the i/o of the camera to do...
Replies
0
Views
1,319
lunknowl
L
T
DVT Intellect 1.2.2
Ahh yes, downsizing. My employer decided to let the quality manager go after a disagreement. Problem is, the QA manager took the password and user...
Replies
3
Views
2,165
techimnot
T
A
Dvt-fanuc ethernet communication
Hi, I am trying to comunicate a dvt 544C with a R-J3ib fanuc controller using MODBUS and the system is already connected, but the communication...
Replies
1
Views
3,080
kbpatton
kbpatton
J
DVT 535 barcode reader
Hello all, Wondering if anyone uses DVT cameras. I got a DVT 535 camera and using Intellect 1.3.1 software. The cameras are setup to read a 2D...
Replies
5
Views
2,548
JOLTRON
J
A
Using Prosoft card to interface btw DVT and SLC5/04
Hi, I am having great problems trying to read data from my DVT legend 540 camera. The PLC is an Allen Bradley SLC 5/04 that will control...
Replies
5
Views
2,195
Giz99
G
Back
Top Bottom