dYoast
Lifetime Supporting Member
I have a DVT 515 camera that keeps locking on the busy signal. It will start an inspection, but never stop. The only I/O that is then on is the busy signal. I have to remove power and restart in order to begin operating again. This same problem has occured previously with another camera. I have tried the camera on a different power cable, different Ethernet cable and different breakout board, but the problem follows the camera.
I am using Intellect version 1.40.
Has anyone experienced this problem? Any ideas?
Thanks in advance.
I am using Intellect version 1.40.
Has anyone experienced this problem? Any ideas?
Thanks in advance.