Hello All
I lurk on the site regularly and you have gotten me out of trouble numerous times... thank you for that.
On to the fun: I'm running win7 with XP as a virtual machine with all my programming gear installed in XP. I've got a new 1769-L35E that i'm going to set up a small network with some remote I/O, touchscreen, etc. I cannot see the processor via ethernet. I've updated firmware to V19.11 and i'm online with my serial cable.
My IP add's and subnet mask seem fine, XP and 7 identical. The processor is one number off on the IP
PLC: 192.168.137.70
SUB: 255.255.255.0
XP: 192.168.137.69
SUB: 255.255.255.0
I was programming via ethernet through VMW yesterday, no issue. I'm thinking i missed something on the setup of the new processor.
Sorry for the length, wanted to have all info available.
Thanks All
I lurk on the site regularly and you have gotten me out of trouble numerous times... thank you for that.
On to the fun: I'm running win7 with XP as a virtual machine with all my programming gear installed in XP. I've got a new 1769-L35E that i'm going to set up a small network with some remote I/O, touchscreen, etc. I cannot see the processor via ethernet. I've updated firmware to V19.11 and i'm online with my serial cable.
My IP add's and subnet mask seem fine, XP and 7 identical. The processor is one number off on the IP
PLC: 192.168.137.70
SUB: 255.255.255.0
XP: 192.168.137.69
SUB: 255.255.255.0
I was programming via ethernet through VMW yesterday, no issue. I'm thinking i missed something on the setup of the new processor.
Sorry for the length, wanted to have all info available.
Thanks All