Ethernet connection issue with CpLX

[ceilingwalker]

That's a good start. Now you need to find how your VM networking is set. Is it bridged to a specific adaptor? or NAT'd. You will find this in the VM settings. Are you using VMware Virtualbox or some other type 1 hypervisor? ESXi / XEn

NAT. It has connect at power on checked and shows connected, under device status.

 

[ceilingwalker]

Resolved. Thank you cheltin for putting me on the right trail. Cheers!

In case this might help someone in the future:

I selected NAT, set up my Ethernet IP parameters for my PC's adapter then went to VMware and set the adapter to DHCP and it's now talking.

 

[chelton]

Glad you got it sorted . Thanks for the follow up.