prinejr
Member
Not the first time I've done this and never had this happen before.
I run BootP, can see the MAC address of the 1756-ENBT, select it and enter the IP address. I get the following message on the ENBT card: "IP address/mask/gateway config invalid". I'm using BootP version 2.3 and my ENBT is running firmware 6.002. Any suggestions?
Must have been the jet lag. I figured it out. Thanks
I run BootP, can see the MAC address of the 1756-ENBT, select it and enter the IP address. I get the following message on the ENBT card: "IP address/mask/gateway config invalid". I'm using BootP version 2.3 and my ENBT is running firmware 6.002. Any suggestions?
Must have been the jet lag. I figured it out. Thanks
Last edited: