sin140530
Member
we have same HMI 2PC / SET LOCAL STATION version 9.0 patch 2021.dec and win10 pro v18.xx
1pc install logix5000 v19 v20
It was going well
when i work ftview studio they was going well
but i connect plc and upload logic at that time!
1pc HMI was can not comm. plc.
but other HMI was well.
so i doing delete linx enterprise's shortcuts..... suddenly!!! HMI Client Can Comm. to PLC
and i doing re makes linx enterprise's shortcuts .. also HMI Client Cannot Comm. to PLC
i don't know this phenomenon
not hear, not experience
when i started my work last 20 years...
why delete shortcuts Can Comm. and makes shortcuts Cannot
i tested change alarm setpoint in problem HMI
and check PLC memory... they move in PLC well
so finally i delete linx enterprise's shortcuts and leave work today.
But tomorrow i must solve this case..
PLZ.. Help me
P.S I can not do well ENGLISH .... SORRY
1pc install logix5000 v19 v20
It was going well
when i work ftview studio they was going well
but i connect plc and upload logic at that time!
1pc HMI was can not comm. plc.
but other HMI was well.
so i doing delete linx enterprise's shortcuts..... suddenly!!! HMI Client Can Comm. to PLC
and i doing re makes linx enterprise's shortcuts .. also HMI Client Cannot Comm. to PLC
i don't know this phenomenon
not hear, not experience
when i started my work last 20 years...
why delete shortcuts Can Comm. and makes shortcuts Cannot
i tested change alarm setpoint in problem HMI
and check PLC memory... they move in PLC well
so finally i delete linx enterprise's shortcuts and leave work today.
But tomorrow i must solve this case..
PLZ.. Help me
P.S I can not do well ENGLISH .... SORRY