FX3U-485ADP-MB Programming

markyspicer

Member
markyspicer
Join Date
Sep 2014
Location
Manila
Posts
9
Hi!

I'm new to Mitsubishi and now I have to communicate 17 transmitter(read only) to FX3U PLC which have an FX3U-485ADP-MB adapter. I try to download the sample program in the Mitsubishi website but it made me confuse on how to segregate the devices individually. Does anyone experience this before? Somebody can help me regarding my confusions?

Thanks!

BTW, 17 devices are all transmitters which are group into 4 4-20mA to RS485 module which means has their separate slave address(1,2,3,5) respectively connected in a daisy chain structure.:oops:
 

Similar Topics

G
Mitsubishi - FX3U + FX3U-USB-MB + FX3U-485ADP-MB - Modbus configuration - Paramètres
Bonjour, Je n'ai pas de communication modbus RTU vis la configuration ci-dessus. J'ai essayé les deux mode ch1 et ch2 mais rien ne fonctionne...
Replies
0
Views
171
Gael Boucekkine
G
G
The larger the program, the slower Modbus becomes. (FX3U low-cost Chinese PLC)
I'm a beginner in the automation field and I've set up an automation system connecting several devices (datalogger, radio, etc.) via Modbus RS485...
Replies
5
Views
216
lfe
L
C
PLC Program Misubishi FX3U
Hi All, want to ask. I have PLC a programme to control the valve. The existing programme is to control valve A (Y22), and I want to change to...
Replies
2
Views
145
parky
P
H
How to lock a fx3u plc ladder from reading using gx work2
Dear all, I don't know why setup of password became challenging and weird. After setting up the password and try to upload the ladder from the plc...
Replies
3
Views
178
how
H
H
Connection between pc and mitisibushi fx3u-64m plc via usb-sc09-fx cable adapter
Dear all, I have fx3u series plc with built in rs422 port and usb-sc09-fx cable. I have a a hyperterminal like application to send and receive...
Replies
8
Views
230
how
H
Back
Top Bottom