rsdoran
Lifetime Supporting Member
I am using a 90-30 with that Data Access unit, it seems simple to operate but does not allow me to change timer preset values when I try.
I programmed the 90-30 311 with VersaPro ver 2.02 and the firmware has been upgraded.
Is there something in VersaPro that locks the values in all the timer PV settings.
Is it possible to lock or unlock certain timers to block some that shouldnt be changed?
The manual for that TCR is at:
http://www.heapg.com/Documentation/...050/m008503.pdf
I programmed the 90-30 311 with VersaPro ver 2.02 and the firmware has been upgraded.
Is there something in VersaPro that locks the values in all the timer PV settings.
Is it possible to lock or unlock certain timers to block some that shouldnt be changed?
The manual for that TCR is at:
http://www.heapg.com/Documentation/...050/m008503.pdf