hello,
I'm trying to set up communications between two Mitsubishi L series PLCs using the built in Ethernet port. All of the information I can find online is for GX Works 3 which unfortunately I don't have access to.
Can anyone point me in the right direction for this? I'd prefer to use modbus tcp if possible.
I'm trying to set up communications between two Mitsubishi L series PLCs using the built in Ethernet port. All of the information I can find online is for GX Works 3 which unfortunately I don't have access to.
Can anyone point me in the right direction for this? I'd prefer to use modbus tcp if possible.