Help in configuring Woodhead's backplane module for AB ControlLogic PLC.

[vaidyaas]

Dear All,
I'm trying to configure the SST-PFB-CLX, backplane module for AB ControlLogix (it enables profibus communication for ControlLogix) by Woodhead Inc.
I want to configure this card as Slave with Siemens 315-2DP CPU as master.

Can anybody help me in configuring this? Has anybody done this before.

Please let me know the procedural steps for this configuration.

Regards,

ASV

 

[sandymax]

Links

Pls check out links

http://www.profibus.com/forum/ForumID1/531.html
http://www.profibus.com/forum/ForumID1/516.html
http://www.profibus.com/forum/ForumID1/404.html

I don't have exp in Profibus
i thouht this will help you little. But just checkout
Thanks
sandymax

 

[dchartier]

hello vaydiass;

I suggest you download the 7150022_PFBCLX.pdf from Woodheads' site. it has a complet chapter on the configuration of te PFB-CLX module as a slave, and the different parameters you need to setup in the Controllogix Tags.
hope this helps,
Daniel Chartier