I need to do a screen for one of my processes that pretty much duplicates the action of a common annunciator panel. Here is what I have to work with:
Siemens MP270B HMI
S7 313C Processor
1 N.O. momentary contact PB switch in panel
All the necessary I/O and input signals
Federal alarm horn Q124.6
Red Strobe (internal blink) Q124.7
What I see is maybe a window for each major piece of equipment, which are then subdivided with little windows for status like OK or Not OK. Running or not running. alarm etc.
I am not much of an artist, so I am looking for a little input here. What do you think?
Robert
Siemens MP270B HMI
S7 313C Processor
1 N.O. momentary contact PB switch in panel
All the necessary I/O and input signals
Federal alarm horn Q124.6
Red Strobe (internal blink) Q124.7
What I see is maybe a window for each major piece of equipment, which are then subdivided with little windows for status like OK or Not OK. Running or not running. alarm etc.
I am not much of an artist, so I am looking for a little input here. What do you think?
Robert