Hi,
We will replace an existing hmi (fuji UG330) with another brand (say, keyence or omron or mitsubishi). Existing connection is FUJI PLC to FUJI HMI.
here are my consideration for the hmi replacement:
1. Make sure that the hmi replacement is compatible with the existing PLC.
2. Screen size (should be the same for ease of installation).
3. Colored or mono.
4. hmi memory must be > to the existing hmi.
5. resolution
did i forget to include anything that is essential in hmi replacement consideration?
regards,
theripley
We will replace an existing hmi (fuji UG330) with another brand (say, keyence or omron or mitsubishi). Existing connection is FUJI PLC to FUJI HMI.
here are my consideration for the hmi replacement:
1. Make sure that the hmi replacement is compatible with the existing PLC.
2. Screen size (should be the same for ease of installation).
3. Colored or mono.
4. hmi memory must be > to the existing hmi.
5. resolution
did i forget to include anything that is essential in hmi replacement consideration?
regards,
theripley