GotQuestions
Member
Hello All,
I have a panelview plus 1250 I need to make changes to but I
am not the original programmer. The previous programmer did not
add a button on any screens to access the config screen and I also do not have a usb keyboard to plug into the unit. Is there a key/key sequence that can be pressed on the keypad of the unit during power up that will take me or allow me to go to the config mode? Also is there any difference between a hard boot and a soft boot on these units?
I tried pressing random buttons as the unit was powering up and was able to get to the config mode but I cannot remember what buttons of sequence I used to get there and I do not want to keep rebooting and rebooting the unit
Thanks for your help !
I have a panelview plus 1250 I need to make changes to but I
am not the original programmer. The previous programmer did not
add a button on any screens to access the config screen and I also do not have a usb keyboard to plug into the unit. Is there a key/key sequence that can be pressed on the keypad of the unit during power up that will take me or allow me to go to the config mode? Also is there any difference between a hard boot and a soft boot on these units?
I tried pressing random buttons as the unit was powering up and was able to get to the config mode but I cannot remember what buttons of sequence I used to get there and I do not want to keep rebooting and rebooting the unit
Thanks for your help !
Last edited: