I/O Mapping

dgullige

Member
D
Join Date
Mar 2014
Location
Winter Springs
Posts
12
Using ProWorx 32; trying to figure out how to map an individual address like 40253 to one bit of an address... like such
40253 ----> 40021:5

Each of these are assigned to something different in our SCADA host so I cant just use 40021 as an individual address. Thanks!
 

Similar Topics

A
PLC Upgrade from 1769 to 5069... Card Mapping Error
Hi everyone, Kind of new at this, so we recently upgraded our 1769-l32e to the newer 5069-L320erm, i converted the file over and Verify the...
Replies
8
Views
409
dummy_bit
dummy_bit
B
Fanuc IO Mapping and Safety Mapping
Hello Guys I have an 1756-L73S Controller with a Fanuc Robot mapped as follows: - In 1756-EN2TR Slot 2 the Fanuc Robot is defined as an...
Replies
5
Views
278
jstolaruk
J
E
DH+ Network Mapping
This has been on my mind for a while now, wondering if anyone here has any best practices or insights. I have been working with a plant that has...
Replies
8
Views
550
Jmeadows7676
J
S
"PLC/SLC mapping"
Hi long time out... I´m in a project now, that request to upgrade an old SLC to a new ControlLogix. Just the PLC. It is connected now to a...
Replies
5
Views
1,970
sapoleon
S
I
Modicon M580 Modbus Register Mapping
Hi all, I'm really new to this. I need to export the Modbus register mapping from a Modicon M580 through Control Expert for the registers that...
Replies
4
Views
962
iotguy
I
Back
Top Bottom