kobelu_090
Member
Hi guys,
I've raised my problem on siemens forum ,but it looks that no one couldn't answer .
Basicaly ,what I want to know is if the sketch attached below is correct ?
https://www.automation.siemens.com/...spx?PageIndex=1&PostID=610524&Language=en#top
Best regards
Andrew
I've raised my problem on siemens forum ,but it looks that no one couldn't answer .
Basicaly ,what I want to know is if the sketch attached below is correct ?
https://www.automation.siemens.com/...spx?PageIndex=1&PostID=610524&Language=en#top
Best regards
Andrew