Kinetix 300 memory module.

tjntjntjn

Member
Join Date
May 2012
Location
USA
Posts
94
Hello,

I have (probably silly) question about Kinetix 300.
Do you have to manually send/save Kinetix parameters in the memory module and if so how to do that or are they saved automatically? I did not find option for that in MotionView.

Thank you
 
Every time a value is changed it is written to memory and saved on the drive for reboot. Backing up the MotionView file to your computer should be done after all changes are done
 

Similar Topics

in allen bradley kinetix 300 drive first E31 error shows after resting drive E11 error occurs need solution to reset E11 fault code
Replies
4
Views
174
Have a system that has been running for over a year and all of a sudden getting a ExcessiveVelocityFault on one of the drives when the MSO command...
Replies
2
Views
169
Hello PLCS.Net Forum, First time posting. Let's assume I am a novice. BASIC PROBLEM: My servo/linear piston is no longer zeroed to the...
Replies
9
Views
261
Hello. I have a few machines that use Kinetix 300 (each machine has two drives). Both drives on one of the machine keep losing IP address. They...
Replies
2
Views
117
Hello, We have had a machine running for the last 10 years. It has 2 x Kinetix 300 drives. Around a year ago, one of the drives failed. We were...
Replies
1
Views
470
Back
Top Bottom