Hi all,
I have a configuration of 4 kinetix 5500:
position 1 -> H025 shared AC/DC
position 2 -> H025 shared DC
position 3 -> H008 shared DC
position 4 -> H008 shared DC
randomly the drive 1 and 4 go in precharge state (1-2 times per week).
To exit this precharge state at the beginning i made a run/program/run
transition on CPU.
Today i simply let the machine in manual, so after a timeout the enable bit of the drives goes down.
At this point the drives exit the precharge and go in stopped state.
When the enable bit goes on again the drive goes in running and operate correctly.
Did you experienced something similar?
Thanks to all
Bartech
I have a configuration of 4 kinetix 5500:
position 1 -> H025 shared AC/DC
position 2 -> H025 shared DC
position 3 -> H008 shared DC
position 4 -> H008 shared DC
randomly the drive 1 and 4 go in precharge state (1-2 times per week).
To exit this precharge state at the beginning i made a run/program/run
transition on CPU.
Today i simply let the machine in manual, so after a timeout the enable bit of the drives goes down.
At this point the drives exit the precharge and go in stopped state.
When the enable bit goes on again the drive goes in running and operate correctly.
Did you experienced something similar?
Thanks to all
Bartech