I have an L61 that I am using to poll several PLC from SLC 5/04 (DH+) to ML 1400 and Compactlogix L32E.
I have successfully set up the message and configured it to take information from a ML1100 and a SLC5/04 DH+.
I cannot get things set up to take information from the L32E. I have a DINT[5] in the L32E with data that I want to pull to a DINT[5] in the L61. I will be going out my ENBT card in slot 1 of the L61 at address 192.168.0.100 and the address of my L32E is 192.168.0.48.
I have been reading here, and I don’t know if it is a path issue or other configuration. I am using the CIP Data Table Read selection.
Please help.
I have successfully set up the message and configured it to take information from a ML1100 and a SLC5/04 DH+.
I cannot get things set up to take information from the L32E. I have a DINT[5] in the L32E with data that I want to pull to a DINT[5] in the L61. I will be going out my ENBT card in slot 1 of the L61 at address 192.168.0.100 and the address of my L32E is 192.168.0.48.
I have been reading here, and I don’t know if it is a path issue or other configuration. I am using the CIP Data Table Read selection.
Please help.