plcman
Member
Hello
I have a situation where a XBT-F HMI has lost its program. The program inthe TSX Micro PLC is fine. I have to create an HMI application to fit the PLC Program.
My question is, do I need to configure the dialog table in the XBT-L1000 s/ware in order to display %MW:i data or is the dialog table just for such items as the alarm table. In short do I need to configure the dialog table or not.
Any advice gratefully received.
I have a situation where a XBT-F HMI has lost its program. The program inthe TSX Micro PLC is fine. I have to create an HMI application to fit the PLC Program.
My question is, do I need to configure the dialog table in the XBT-L1000 s/ware in order to display %MW:i data or is the dialog table just for such items as the alarm table. In short do I need to configure the dialog table or not.
Any advice gratefully received.