Eric
Member
It is about time I started to use STL and S coils so I got out the Manual. But it shows the STL S21 direct to Y10 then branch down to T1 but when I try to enter this I find the STL S21 command becomes its own line and I can then enter the output Y10 below it. But not the T1 command. I tried M8000 then T1 and it seems to work with emulator but before I try it with live machine I want to be sure I am getting the system right. Also at work we don't have GX_Developer so they use FXGPWIN but I can't find instructions so I use MEDOC at work. Rather a bore writting in MEDOC converting to GX to test then back to MEDOC for changes. I see I can convert from GX to FXGPWIN so it would be better to use FXGPWIN any idea where I can get instructions on this software. Not allowed to load my copy of GX on firms machine IT department will not let me.
Thanks Eric
Thanks Eric