Ml1400 hsc wiring

roxusa

Lifetime Supporting Member
R
Join Date
Nov 2008
Location
NJ
Posts
994
How to wire a Differential encoder to ML1400. Using the HSC I have set up the HSC before using Single ended but have a nice US Digital HD25-2500-F-N-H-I-D which is a 24vdc Differential encoder with A-B & Z and their complements.
I am not sure when it comes to this I have used open collector with resistors
And Single ended line driver but never differential.
Thanks
 

Similar Topics

R
Ml1400 hsc
Setting up the Function file for the HSC as Mode 8 I think I only use the A+ & B+ inputs on I:0/0/0 & I:0/0/1. Why do they show A/C & B/D for the...
Replies
0
Views
1,250
roxusa
R
I
ML1400 HSC overflow problem
I have programmed a cut-to-length system on ML1400 which I am simulating with a voltage controlled oscillator driving HSC:0. The program uses a...
Replies
1
Views
1,542
parky
P
T
Allen Bradley ML1400 HSC
Hi Guys I'm new to Allen Bradley and I'm trying to figure out how to get a simple encoder input into the MicroLogix 1400. After looking through...
Replies
13
Views
5,828
rimlogical
rimlogical
R
ML1400 HSC high preset interrupt
Hi Guru's I have been trying to set up my HSC interrupt (HSC:0/HPI)to trigger a counter in my ladder logic. I read the manual like 5 times and I...
Replies
10
Views
4,356
bernie_carlton
bernie_carlton
J
Cmore HMi to ML1400
Hello, I am new here and have been working with PLCs for a few years now. I have been tasked with setting up a Micrologix 1400….. to a Cmore 10...
Replies
10
Views
495
Jmccoy
J
Back
Top Bottom