SCUBA NooB
Member
I'm trying to get comms to a SLC CPU 504 using a moxa gateway EIP 3270. I can use their Procom software which sets up a virtual comm port so RSLinx can see the device using the DF1 driver. What I need to do is see the CPU over EIP so it can be accessed via a SCADA system which is Ethernet only. Can anyone help me understand why Ethernet/IP in RSLinx only see's the Moxa gateway as an unrecogonised device? P.S. I can use RSLinx as an OPC but this is expensive when I have purchased what I thought was a serial to Ethernet gateway.
Last edited: