My task is to connect a MQTT broker on IP range 192.168 towards my OT network with the L33ER PLC on 10.10. IP range.
Need communication both read/write to the MQTT client.
Solutions 1: Use a NAT router and use the AOI from Rockwell. Anyone used it before, think manual is very simple and cant get my head around how to use the imported program. Anyone with experience with the AOI MQTT program/sample code?
Solution 2: probably use the 460ETCQT-N2E from:
https://www.rtautomation.com/mqtt-gateways/
and use AOI Modbus Client.
Super grateful if I could get any input
Please see below attache picture
Need communication both read/write to the MQTT client.
Solutions 1: Use a NAT router and use the AOI from Rockwell. Anyone used it before, think manual is very simple and cant get my head around how to use the imported program. Anyone with experience with the AOI MQTT program/sample code?
Solution 2: probably use the 460ETCQT-N2E from:
https://www.rtautomation.com/mqtt-gateways/
and use AOI Modbus Client.
Super grateful if I could get any input
Please see below attache picture