Due to confidentiality issues, we are unable to send you the program - sorry. I will do my best to explain things as well as possible. What made us think that we were using Working bits, is: Under "Symbols" for our program, we will have an input or output Name, the Type BOOL, Address/Value of 0.00 or 10.01 for example, Usage type which are all called Work.
But when we open the PLC Memory Map and select IR, there is nothing in the table. Column one shows IR000, IR010, and so on and each row goes from 0 to 10. Each cell is empty. If we are to using the IR area as you mentioned above, how do we correlate these things together when cross referencing our HMI tags to a specific PLC address?
Both of us have RSLogix 500 and 5000 programming experience and a couple of others, but I have done no Omron programming before. Not much support for these older PLCs out there. Any help you can give us is much appreciated!!!