One shot in ST

You are right.

Oops, my mistake.

Code:
[/color][/size]
 
[size=3][color=#008000](*Move the initial size for calculations*)
[/color][color=#0000ff]if [/color]EN [color=#0000ff]and [/color][color=#0000ff]not[/color] lastip [/size][size=3][color=#0000ff]then 
[/color][/size][size=3]reelsize:=initsize;
(* PUT ALL OTHER ACTIONS HERE *)
[color=#0000ff]end_if[/color][/size][size=1][size=3];[/size][/size]
[size=3]lastip:=EN;[/size]
 
[size=3]


Phil, Why isn't that the code doesn't show up in the final post like it does in the preview? In the preview there are indentations. In the final post the indentations are lost.
 

Similar Topics

Hello all. This is a very lonnnnnnng shot but worth a try. I have an OMS Group Impact100 metering machine. At this customer it blows foam into 3d...
Replies
0
Views
191
Howdy Everyone, So I have been retrofitting a cell to run different fixtures and updating it with new drives and a few other things. It runs...
Replies
15
Views
1,512
Hi all, I am working on a ladder program in AS and I was to trigger a reading on my IO link sensor every .5 s, and use that value to run a...
Replies
1
Views
544
Hello Everybody, Someone must be familiar with Horner Cscape, I wrote a program on a overhead door with a 3 button station,I'm working on a...
Replies
2
Views
1,464
personally I don't care about golf - but this is one impressive shot ... if it weren't on tape, I wouldn't have believed it ... the first video in...
Replies
1
Views
1,504
Back
Top Bottom