Hi All,
If i have the original project for TIA Portal V13sp1.
the SoftPLC is running in V13sp1 in a 1515sp Win7 industrial PC.
I was not able to open the project until the laptop had V13SP2 (probably because v13sp1 support only up to win8.1)
Now I can open the project and get online with the PLC.
I need to modify just the LOCAL time for the PLC system clock.
I just Upload to the laptop the current program in the PLC.
I made the chance to the right time zone. So, I'm ready to download to the PLC
then I stopped ... I'm not running win7 and my version is v13sp2.
This is a machine in a Pharma Ind. Environment so any slight change must be documented and validated. no room for experimentation
If i have the original project for TIA Portal V13sp1.
the SoftPLC is running in V13sp1 in a 1515sp Win7 industrial PC.
I was not able to open the project until the laptop had V13SP2 (probably because v13sp1 support only up to win8.1)
Now I can open the project and get online with the PLC.
I need to modify just the LOCAL time for the PLC system clock.
I just Upload to the laptop the current program in the PLC.
I made the chance to the right time zone. So, I'm ready to download to the PLC
then I stopped ... I'm not running win7 and my version is v13sp2.
- Is the PLC going to accept the change without problems?
- Can it stop working?
- Is the new program going to be SP2? or will keep it soul as sp1.
This is a machine in a Pharma Ind. Environment so any slight change must be documented and validated. no room for experimentation
Last edited: