craig_avanzar
Member
OP
Here I go again
Ok so this time I tried to zip them. Here goes.
EDIT: So imagine if you will that on the side that my partner is standing by that there will be 2 driven wheels with a star attached to the hubs and a connecting rod going to a simulated piston box. There is plenty of room for graphics on the front panels of the trailer, a double sink w/ hot and cold running water, a generator for the power, a roof and a roll out awning on the opposite side, a camper size fridge, lights, a whistle, the crossing bars and a ticket window(replica). These were taken last weekend and our first competition is in March so you can see there is still work to be done and that is why time is a concern considering the wiring and such.
All comments and suggestions are welcome and appreciated.
Ok so this time I tried to zip them. Here goes.
EDIT: So imagine if you will that on the side that my partner is standing by that there will be 2 driven wheels with a star attached to the hubs and a connecting rod going to a simulated piston box. There is plenty of room for graphics on the front panels of the trailer, a double sink w/ hot and cold running water, a generator for the power, a roof and a roll out awning on the opposite side, a camper size fridge, lights, a whistle, the crossing bars and a ticket window(replica). These were taken last weekend and our first competition is in March so you can see there is still work to be done and that is why time is a concern considering the wiring and such.
All comments and suggestions are welcome and appreciated.
Last edited: