Hi All,
I had a similar problem as the topic posted by Kamenges.
http://www.plctalk.net/qanda/showthread.php?t=12519&highlight=panelview+passthrough
The only difference is I used SLC 5/05 and PV550. I enabled the passthrough mode and set up the right routing table. I can see the PV node in RsLinx and also able to upload program from PV. But, during download, I get to the line about 'checking device compatibility' and I don't get any further. I used window 2000 SP4.
Anyone experience this problem before with window 2000 instead of window XP?
Appreciate the help.
Thanks
I had a similar problem as the topic posted by Kamenges.
http://www.plctalk.net/qanda/showthread.php?t=12519&highlight=panelview+passthrough
The only difference is I used SLC 5/05 and PV550. I enabled the passthrough mode and set up the right routing table. I can see the PV node in RsLinx and also able to upload program from PV. But, during download, I get to the line about 'checking device compatibility' and I don't get any further. I used window 2000 SP4.
Anyone experience this problem before with window 2000 instead of window XP?
Appreciate the help.
Thanks