jdcraig101
Member
PanelView Plus Macro Help
Hi, We are using a PanelView Plus 1500 with a Control Logix L71. There is a series of actions that need to occur when one button is pressed. We figured a macro would be the way to go, but have no experience with them.
When the button on the PanelView is pressed the following things need to take place:
1. Activate bypass of xyz tag in processor A (discrete input)
2. Activate bypass of xyz tag in processor B (discrete input)
3. Activate output to abc device from tag in processor A (discrete output)
When button is pressed on HMI, two inputs (each on a separate controller) are bypassed and an output is sent to an end device.
Thanks in advance.
Hi, We are using a PanelView Plus 1500 with a Control Logix L71. There is a series of actions that need to occur when one button is pressed. We figured a macro would be the way to go, but have no experience with them.
When the button on the PanelView is pressed the following things need to take place:
1. Activate bypass of xyz tag in processor A (discrete input)
2. Activate bypass of xyz tag in processor B (discrete input)
3. Activate output to abc device from tag in processor A (discrete output)
When button is pressed on HMI, two inputs (each on a separate controller) are bypassed and an output is sent to an end device.
Thanks in advance.