I have a system using a Panelview Plus Standard (2711P-T10C21D8S).
It is configured with 86 alarms, most of which work fine, but for about five of them, when triggered, the alarm pop-up screen appears with no alarm message. Also any new alarm I create does the same thing
The panel was initially running firmware 9, I updated to 11 and the issue persists.
Has anyone ever seen anything like this? I have attached the application file if anyone is interested. Alarms 84, 86, 79, 82 and 80 are the ones where no message appears.
Thanks for any help,
Rob
It is configured with 86 alarms, most of which work fine, but for about five of them, when triggered, the alarm pop-up screen appears with no alarm message. Also any new alarm I create does the same thing
The panel was initially running firmware 9, I updated to 11 and the issue persists.
Has anyone ever seen anything like this? I have attached the application file if anyone is interested. Alarms 84, 86, 79, 82 and 80 are the ones where no message appears.
Thanks for any help,
Rob