bbzp Member B Join Date Nov 2020 Location USA Posts 9 Feb 18, 2021 #1 Does anyone know of the best way to get to the windows CE on a panelview plus if you don't know the password?
Does anyone know of the best way to get to the windows CE on a panelview plus if you don't know the password?
JaxGTO Member Join Date Apr 2009 Location Kalieefornia Posts 1,073 Feb 18, 2021 #2 I know the default is either password or PASSWORD. But if you plug in a keyboard you should be able to just hit the Windows key.
I know the default is either password or PASSWORD. But if you plug in a keyboard you should be able to just hit the Windows key.
Ken Moore Lifetime Supporting Member Join Date May 2004 Location North, West, South Carolina Posts 3,475 Feb 18, 2021 #3 Flash the firmware, then you will be required to set the password same as new.
bbzp Member OP B Join Date Nov 2020 Location USA Posts 9 Feb 19, 2021 #4 Thank you for the response, I will try both ways!