iahiii_2005
Member
Hi All,
I am trying to achieve the following.
Basically there is photo eye that senses if the bag is present or not.
I have to use the photo eye's input to calculate a rate i,e bags/min and compare that to ideal rate and set a bit.
How would i go about doing that? I am trying to do this in SLC(RSLogix 500),any help would be greatly appreciated.
Also i am trying to calulate downtime like this "
" Once the photo eye does not sense a consecutive bag pass for a designated minimum duration, line downtime will start to be measured and stop when a bag once again passes on the conveyor.
" Downtime measured will be cumulative for all BTs run on the line for the entire production day"
Thanks and i really appreciate it.
I am trying to achieve the following.
Basically there is photo eye that senses if the bag is present or not.
I have to use the photo eye's input to calculate a rate i,e bags/min and compare that to ideal rate and set a bit.
How would i go about doing that? I am trying to do this in SLC(RSLogix 500),any help would be greatly appreciated.
Also i am trying to calulate downtime like this "
" Once the photo eye does not sense a consecutive bag pass for a designated minimum duration, line downtime will start to be measured and stop when a bag once again passes on the conveyor.
" Downtime measured will be cumulative for all BTs run on the line for the entire production day"
Thanks and i really appreciate it.