ulkucu_hareket Member Join Date Jul 2006 Location TÜRKİYE Posts 22 Jan 28, 2007 #1 Hi! Dear friends i need picture of any Industurial Etnerhet Cable..I want to see connection point to PLC...
Hi! Dear friends i need picture of any Industurial Etnerhet Cable..I want to see connection point to PLC...
Tim Ledwith Member T Join Date Nov 2003 Location Mackay, QLD Posts 90 Jan 28, 2007 #2 Hi, Is this what you are looking for ? Tim.
JesperMP Lifetime Supporting Member + Moderator Join Date Feb 2003 Location ᚴᚬᛒᛅᚾᚼᚬᚠᚾ Posts 16,342 Jan 29, 2007 #3 For Industrial Ethernet "normally" is only used 100Mbps connections which "normally" means only 4 wire cables. So for a straight cable you need to connect like this: 1-1 2-2 3-3 6-6 And for a crossed cable you need to connect like this: 1-3 2-6 3-1 6-1
For Industrial Ethernet "normally" is only used 100Mbps connections which "normally" means only 4 wire cables. So for a straight cable you need to connect like this: 1-1 2-2 3-3 6-6 And for a crossed cable you need to connect like this: 1-3 2-6 3-1 6-1
panic mode Member Join Date May 2003 Location Toronto, Canada Posts 1,963 Jan 29, 2007 #4 http://www.ertyu.org/steven_nikkel/ethernetcables.html
ulkucu_hareket Member OP Join Date Jul 2006 Location TÜRKİYE Posts 22 Jan 29, 2007 #5 Friends thanks for your helps! They were very useful... Best regards