PLC-200 with TP177B & ANDON

shriganesh

Member
S
Join Date
Nov 2010
Location
Pune
Posts
5
Hello,
I have used profibus to communicate CPU-226(Master) with CPU-224(Slave) with TP277PN/DP & ANDON Board.My DI/DO's are 180 so I have used additional CPU-224 only for DI/DO's.My all logic is in CPU-226(Master).
Everything work fine but I get delay for CPU-224 DI/DO's.I have to reduce this delay.But I am not able to do it.Pls gave me a proper solution.
emotion-10.gif

For Resolve this delay problem can I go for CP 243-1 instead of Profibus or Is it possible by using Profibus?How?

Regards,
 

Similar Topics

J
PLC SIMATIC S7 1200 / KOP/SCL question
HI i would like to know how to get a variable that will store the amount of times a program has been executed. The issue is I have 3 DBs for 1 FB...
Replies
2
Views
82
jimix
J
K
PLC S7 1200 fail to go online
Hi. I’m trying to upload program from existing PLC S7-1200. Create new project in TIA v15.1 then upload. After upload successfully, go online but...
Replies
5
Views
228
tarik1978
T
R
Siemens S7-1200 profinet communication with codesys plc
Hi Guys, I am trying to establish communication over profinet between Siemens S7-1200 PLC as IO device and codesys plc as IO controller. But I am...
2 3
Replies
43
Views
2,880
raghu_k
R
M
Upload from PLC (s7-1200 version 3.0) to PG/PC
Hello members, I have Siemens S7-1200 PLC (CPU 1214C AC/DC/Rly version 3.0) and I want to get backup from it. I know how the procedure works. I...
Replies
0
Views
140
Maaz Saqib
M
P
Firmware for PLC S7-1200
Hi! Please share firmware for 6ES7212-1BE31-0XB0 https://support.industry.siemens.com/cs/nl/en/view/64789124
Replies
7
Views
748
p-nik
P
Back
Top Bottom