psychosunshine
Member
I got the idea to use DH+ to connect 2 PLCs together.
One PLC is a ControlLogix 8.02. And the other is a ControlLogix 32.02
Are there any examples of the MSG configuration for this?
I'm reading the 1756-UM514c-en-p User Manual. And, I'm starting to wonder if this is a good idea. Or if I should look at some Ethernet options. I see lots of that being done.
One PLC is a ControlLogix 8.02. And the other is a ControlLogix 32.02
Are there any examples of the MSG configuration for this?
I'm reading the 1756-UM514c-en-p User Manual. And, I'm starting to wonder if this is a good idea. Or if I should look at some Ethernet options. I see lots of that being done.