I would appreciate if anyone could help with eng to eng (or eng to rus) explanation!
or post a link to a doc i could refer to for expl.
I'm currently working on tech doc (eng to rus) related to replacing old PLCs with ControlLogix ones. I have problem understading some of the terms and abbr.
i know it's an imposition but i'll be very thankful if you can open some of them.
1. For PLC Object
PV
DB
HHSP
HiSP
HiALM
HHLAM
Debounce
Override En
Override Dis
________________________________
2. Under Input&Outpu Processing
Run Status
RUN IND
Permissive/Interlock
_______________________________
3.
Point configuration
point declaration
icon point linking detail
popup poing linking detail
FB pin point name
parameter PV/OP/MD/Source
Under FB pin point name - abbr. IND
______________________________________________
4. Foam Header Permissive (context: If any of three open commands i.e. from HMI, logic or field is generated, the valve will open regardless of the close commands. However, for closing all commands should demand close to close the valve. However open command will work only if the Foam Header Permissive is normal.)
_______________________________
5. Deluge Pump:
Fail to SD
Fail to BD
________________________________________
6. Duty/Standby motor
Scripts on DSBStatus will run on Load and Update events?
__________________________________________
7. Animation details
Under Status description: Trip (fill color animation Red)
______________________________________________________
8.
ESD Analog Inputs for HIPPS
Input&Output Processing for HIPPS:
Process input
Input Scaling
Control Set-point
Control Output
_______________________________________________________
9. Alarm Management
Inhibit/override expiry alarm
Alarm inhibit/override
Deviation alarm
Fault alarm
HH/H/LL/L Alarm
Device alarm
Device Inhibit/Override alarm
First Out
or post a link to a doc i could refer to for expl.
I'm currently working on tech doc (eng to rus) related to replacing old PLCs with ControlLogix ones. I have problem understading some of the terms and abbr.
i know it's an imposition but i'll be very thankful if you can open some of them.
1. For PLC Object
PV
DB
HHSP
HiSP
HiALM
HHLAM
Debounce
Override En
Override Dis
________________________________
2. Under Input&Outpu Processing
Run Status
RUN IND
Permissive/Interlock
_______________________________
3.
Point configuration
point declaration
icon point linking detail
popup poing linking detail
FB pin point name
parameter PV/OP/MD/Source
Under FB pin point name - abbr. IND
______________________________________________
4. Foam Header Permissive (context: If any of three open commands i.e. from HMI, logic or field is generated, the valve will open regardless of the close commands. However, for closing all commands should demand close to close the valve. However open command will work only if the Foam Header Permissive is normal.)
_______________________________
5. Deluge Pump:
Fail to SD
Fail to BD
________________________________________
6. Duty/Standby motor
Scripts on DSBStatus will run on Load and Update events?
__________________________________________
7. Animation details
Under Status description: Trip (fill color animation Red)
______________________________________________________
8.
ESD Analog Inputs for HIPPS
Input&Output Processing for HIPPS:
Process input
Input Scaling
Control Set-point
Control Output
_______________________________________________________
9. Alarm Management
Inhibit/override expiry alarm
Alarm inhibit/override
Deviation alarm
Fault alarm
HH/H/LL/L Alarm
Device alarm
Device Inhibit/Override alarm
First Out
Last edited: