unsaint32
Member
This problem happens only about once/twice per week.
We have an uncoiler motor that the operator needs to run with the safety gate open. The motor is run by PFLX 753. But sometimes, (only when the gate is open) the motor does not run. When that happens, PFLX753 display shows "Not enabled." Then when we close the gate again, the display goes away and the motor starts working again. Once we run the process then the problem goes away for a while and the next time we open the gate and can run the motor just fine.
Thanks for any help.
We have an uncoiler motor that the operator needs to run with the safety gate open. The motor is run by PFLX 753. But sometimes, (only when the gate is open) the motor does not run. When that happens, PFLX753 display shows "Not enabled." Then when we close the gate again, the display goes away and the motor starts working again. Once we run the process then the problem goes away for a while and the next time we open the gate and can run the motor just fine.
Thanks for any help.