PowerFlex 753 TB2 Terminal Designations

[jpanelle11]

Okay so the situation is I am trying to utilize R1NC to utilize a interlock. I have it all planed out... now I am having the best time trying to locate the param to enable the drive to look for R1NC. Any adive? I have most all of the manuals downloaded.

Terminal Name Description Related Param.
R0NO Relay 0 N.O. Relay contact output 10
Rating: 240V AC
or 24V DC = 2 A max.
Inductive/Resistive
R0C Relay 0 Common
R0NC Relay 0 N.C.
-------------------------------------------------------------------------------------
R1NO Relay 1 N.O. 20 20
R1C Relay 1 Common
R1NC Relay 1 N.C

Per: Rockwell Automation Publication PFLEX-AP005A-EN-P - October 2010

TB2 Terminal Designations (Cat. Nos. 20-750-2262x-2R)

 

[jpanelle11]

Related Param: 20, 110,111, 115,116 on Port X
Per :Rockwell Automation Publication 750-IN001O-EN-P - October 2014
Table 56 - TB2 Terminal Designations (2 Relay Outputs: 2R)

 

[dburnum]

While I am familiar with the 753 drive, I have never seen a R1xx, relay on TB2. Only R0xx. Maybe that is an option on an option card?...or an option for the main board....just never seen one.

 

[widelto]

Relay Output 1 Select – I/O Module model 20-750-2262C-2R or 20-750-2262D-2R is installed.