Ron Beaufort
Lifetime Supporting Member
a brand new member ... Patson ... sent this to me by private message ... I suggested that he post it here so that everyone could offer some help ... he wrote back and asked me to please post it for him until he gets more familiar with how to use the forum ...
Need some help!!!
I’m not good in English. I would like to start to have your expertise .I saw your email on a internet forum. The study that I carried out relates to my training course in automation but I would like to also make with your help a good programmation with Rslogix 5000. My goal first was to design a ramp generator like show on the figure (fig 1) software with Rslogix5000 of controllogix.
I already made an program , but my supervisor told me that , my realization don’t really solve the problem, cause I generate the ramp with one order, he want me to generate a ramp twice:
First order: generate a ramp like show in a figure and wait second order
Second order: generate a ramp until the end.
Now my generations only do the first order, I don’t know how to continue program by
Please I need your help cause I will have a mad mark on my stage, If you help me I will wrote a good report and try to have a good mark .
I would like to sent a first order(start) to start generate the slopes(ramp), and as long as I would not have sent the second order for the stop the rampe_1 will be always with the maximum position, and once the second order (stop) sent,il will have there a second generation of slope up to value 0 .
Please sent me your email and i will sent you a figure represent it and program i begin.
Thanks a lot
my email adress: [email protected]
_________________
TFP