Hi,
I have a pump connected to a VLT and I want to control is PQW to a certain flow.
A-----PUMP1----Flowmeter1--------------> OUT
B-----PUMP2---------Flowmeter2--------|
I will explain. Pipe A I have a variable flow and I want to control PUMP2 to 25% of the flow in point. How can put the correct value in PQW for VLT to pump2?
When Flowmeter1 is 100m3/h, pump2 need to send 25m3/h. Allways in that porpotion. If flow1 200m3/h flow 2 is 50m3/h. How can I adapt my PQW to VLT to control to that porpotion?
How I do that? Thank's for all.
PS
I have a pump connected to a VLT and I want to control is PQW to a certain flow.
A-----PUMP1----Flowmeter1--------------> OUT
B-----PUMP2---------Flowmeter2--------|
I will explain. Pipe A I have a variable flow and I want to control PUMP2 to 25% of the flow in point. How can put the correct value in PQW for VLT to pump2?
When Flowmeter1 is 100m3/h, pump2 need to send 25m3/h. Allways in that porpotion. If flow1 200m3/h flow 2 is 50m3/h. How can I adapt my PQW to VLT to control to that porpotion?
How I do that? Thank's for all.
PS
Last edited: