Profinet and Danfoss FC302 - PPO5

[captain_fracasse]

Hello all,

My problem is that I need to send a max current value into a Danfoss FC302 using the profinet communication. Not so complicated normally but when I try to configure the drive using the Danfoss GSD file there's all the PPO except PPO1, PPO2 and PPO5 that means no possibility to send any information into the drive!!!!
People from Danfoss suggest us to control the current into our PLC but... I'd like to know if somebody has another idea.
It's amazing because all PPO configurations exist in Profibus!!!

Thanks!

 

[LazyLogik]

Use something similar to DPV1

Hi,

if you don't need to set this parameter very fast you can use SFB52 and SFB53 in siemens PLC to access any parameter in the drive.