Programming a Kill Switch Please Help!

[Lancie1]

Still haven't quite figured that out yet...

There are 2 or 3 ways to get into the Address Picker: Edit Mode. "Ctrl-T" brings it up, or from the top menu you can select "Program, Address Picker".

Another way is simply to click on the instruction that you want to edit, then on the pop-up menu, click on the box to the right of the Bit Memory Address. That brings up the Address Picker: Pickup Mode. Click on the box in the lower left corner to switch to Edit Mode. Then you can change or add new address descriptions.

 

[bernie_carlton]

Once you change a name hit 'Enter' then click on another line, not the one you are editing. I seem to have to do this to make the change stay.

 

[Lancie1]

Bernie,
If you make the change, press "Enter", then "OK" at the bottom right of the Address Picker screen, then the change seems to stick.

 

[eckhoff.julia]

Thank you! I am slowly learning. You have been of immense help.