PV 550 to AIC to MicroLogix 1500

[mmarinr]

SO here's what I got:

PV 550 cat 2711-K5A2 Ser H Frn 4.48

which goes through a

1761-CBL-AS09

connected to an AIC Converter

which goes through a

1761-CBL-AM00

into the CH0 of my Micrologix 1500.


The thing is I can't get them to communicate yet.

I did configure the CH0 for a DH485 protocol.

But everything blinks and everything says ERROR.

Any help would be greatly appreciated!

 

[widelto]

you have to use 1761-NET-AIC

 

[mmarinr]

PV 550 cat 2711-K5A2 Ser H Frn 4.48

which goes through a

1761-CBL-AS09

connected to an AIC Converter = 1761-NET-AIC

There

 

[mmarinr]

I got a little closer to the solution but I still get this message

ERROR 208

Unable to write to remote device...



Below you can find how I connected this (instead of PV1000 it's a 550)

 

[OkiePC]

What addresses are you trying to read/write? Can you zip and attach the .pba and .rss files?

 

[mmarinr]

Sure!

Here they are!


MAJOR thanks Okie!

 

[mmarinr]

I think I found it... There are several error on the PBA file.

Good Lord the last version wasn't properly saved :'(

Here I go for a couple of hours pf extra job!

 

[Mickey]

I think I found it... There are several error on the PBA file.

Good Lord the last version wasn't properly saved :'(

Here I go for a couple of hours pf extra job!

Yup. If you right click on the errors it will help you determine what they are. It looks like you have a firmware issue for starters.