ReCalibrating Encoder

[banfield]

Hi everyone! First of all, thank you for taking you time to read this post

This motor (AB MPL-A430H-SJ22AA) was disassembled to change the bearings and then, assembled but now, I have to recalibrate the encoder, so does anyone know how to do it? The model of the encoder is SRS50-FFA0-S01.

Thanks in advance!

 

[wimpiesplc]

you probably need this: https://www.mysick.com/eCatSEO.aspx...German&ProductID=32732&Category=Produktfinder

 

[alan_505]

Rockwell have a procedure but I do not think that it is available to us normal people, you have to get the phasing correct, even if you marked it when removing it there is no guarantee thay you put the encoder back exactly where you removed it, I beleive it has to be set up with 10ths of a degree accuracy or better.

Alan

 

[banfield]

Hi everyone! Thanks for your reply. What about the interface (cable) to connect to it?

Thanks again!