amitpanvekar
Member
Hi folks,
I got four PAXS and one PAXD connected to DSPSX via RS485. Each meter has its own number and baud rate is 9600,data bit 8, stop bit 1 and parity none(meter and in crimson). I am using RLC Instrument driver to connect all these meters.Could you help me to resolve this problem please?
Your help is appreciated.
Cheers
I got four PAXS and one PAXD connected to DSPSX via RS485. Each meter has its own number and baud rate is 9600,data bit 8, stop bit 1 and parity none(meter and in crimson). I am using RLC Instrument driver to connect all these meters.Could you help me to resolve this problem please?
Your help is appreciated.
Cheers