Redundant Protocol Should i use For HMI Cimpilcity 9.0.????

[sultanahmed]

Hi All,

I am Using RX3i PAc System G.E, IC695 CRU320 Redundant CPU(Primary & Secondary) with 4 IC695ETM001(Ethernet Module) Modules were used 2 in Primary Station & 2 In Secondary Station, i want to know which Redundant Protocol Should i use For HMI Cimpilcity 9.0.????
PLC Sofware is Proficy Machine Edition 8.5.

Topology is Attached

 

[gclshortt]

http://platforma.astor.com.pl/files/getfile/id/4665

Here is the manual that discusses redundancy networks.

Hope this helps,

 

[RussB]

I suggest that you look into one of these:
OPC-UA
Triplex
And check with your support team: http://support.ge-ip.com/support/index?page=spage&id=ST6&locale=en_US