RS Tech ED Orlando

Phil Buchanan

Lifetime Supporting Member
Phil Buchanan
Join Date
Jun 2015
Location
Atlanta, Georgia
Posts
640
Who is heading down to RS Tech ED in Orlando? I am flying down tomorrow.

Anyone here doing any of the Rockwell Automation User Research and feedback panel events?
 
I'll be there. Mostly doing networking / cyber security classes. Our company is presenting as well on plant migrations and evolution over the years.
 

Similar Topics

B
Advantech TCP-1250H HMI upload/Download
Good people of PLCs.net, I am currently working with an HMI that is advantech 1250H, that communicates with a 1769 Compact logix and Currently...
Replies
2
Views
76
bdauliya
B
C
AC Tech Drive ESV-In the stop state,can you apply enough voltage to not drift back
Good Morning , I installed an AC Tech ESV 1 HP Drive on a small bucket conveyor. Before it had a DC Motor on it . It now has a Baldor 1 HP...
Replies
1
Views
224
robertmee
R
Kev77
Advantech/Schneider (Modicon) Generator Control
Hi, I have an older Kohler Generator/ATS controller that has a Schneider Electric (Modicon) Momentum PLC and has a Advantech HMI. I assume this...
Replies
3
Views
725
Kev77
Kev77
E
Red Lion tech support in Austell or Atlanta GA.
Hi all, I need some local help to upload the Crimson program from a G310 Red Lion HMI. It cannot be easier than that. The thing is (for reasons...
Replies
6
Views
1,069
Elcan
E
A
Rockwell faceplate AOI needed, bad tech support
Basically, I need the latest version of the Rockwell "PF525_Faceplate_AOI" THe one I have is v1.0 from 2018 I went to the PCDC and typed...
Replies
10
Views
1,579
Contr_Conn
Contr_Conn
Back
Top Bottom