I have two 315-2pn/dp's connected via Ethernet radio. I want to be able to see Input bits remotely from either PLC. I read that it is possible to do this through the Hardware manager without writing any code. I'm using plcsim to test this. below is how I set the PLC's up in hardware manager.
PLC 1 ip
192.168.99.1
inputs I0.0-I5.0
PLC 2 ip
192.168.99.2
inputs I6.0-I9.0
Is this at all possible?
PLC 1 ip
192.168.99.1
inputs I0.0-I5.0
PLC 2 ip
192.168.99.2
inputs I6.0-I9.0
Is this at all possible?